simatherm

Simatherm

Induction heaters

Quickly heat rolling bearings and other ring-shaped metal parts with simatherm products. Thanks to the heat extension, work pieces can be easily fitted onto the shaft. During the heating process, only the work piece heats up; the equipment itself stays cool. simatec manufactures induction heaters for work pieces up to 1,200 kg. Heaters for special applications can be developed on demand.
The inductive heating of ring-shaped parts is quick, clean and efficient. It replaces traditional heating techniques such as hotplates, hot oil baths, open flames or stoves.

The perfect solution for a clean and efficient bearing assembly

Advantages of induction heaters:

  1. Very quick. Devices need no preheating time.
  2. Workpieces are heated very evenly, no isolated hot spots as when using a flame or a hotplate.
  3. No damage to workpieces by hammer blows, flames or acidic oil.
  4. No contamination by old oil, dust or swarf etc.
  5. Bearings can be heated when pre-greased. Bearing grease is only slightly  warmed by radiating heat. The grease is also not contaminated with old oil or washed away as it would be in an oil bath.
  6. No damage to plastic parts on bearings.
  7. The devices themselves remain cold during the warming process, or only become slightly warm from radiant heat.
  8. Low risk of accidents.

simatherm logo

 

  • Hotplate small large

    Hot Plate HPS (small) and HPL (large)

    • HPS for workpieces weighing up to 5 kg; HPL for workpieces weighing up to 10 kg
    • Plate surface (WxD) for HPS: 380x180mm; for HPL: 380x380mm
    • Also included: 1 pair of protective gloves
    • Available for voltages of 100–115 and 230V
    • Control range from 50 to 200 °C
    Download specifications (pdf)
  • IH025

    IH 025 Volcano

    • For workpieces weighing up to 10 kg
    • For workpieces with a minimum inner diameter of 20 mm up to a maximum outer diameter of 160 mm
    • Also included: 1 temperature probe, 1 pair of protective gloves, 1 carrying case
    • Available for voltages of 100, 115 and 230 V
    • PTC (predictive temperature control) for automatic temperature monitoring
    Watch Youtube Video Download specifications (pdf)
  • IH070

    IH 070

    • For rolling bearings weighing up to 120 kg
    • For workpieces with inner diameter of 20 to 400 mm
    • Also included: 3 yokes, 1 temperature probe, 1 pair of protective gloves
    • Available for voltages of 100, 115 and 230 V
    • Swivel arm available as an option
    Download specifications (pdf)
  • IH090

    IH 090

    • For rolling bearings weighing up to 150 kg
    • For workpieces with inner diameter of 20 to 400 mm
    • Also included: 3 yokes, 1 swivel arm, 1 temperature probe, 1 pair of protective gloves
    • Available for voltages of 200, 400–460 and 500–575V
    • Fan cooling for continuous operation
    Download specifications (pdf)
  • IH210

    IH 210

    • For rolling bearings weighing up to 300 kg
    • For workpieces with inner diameter of 60 to 640 mm
    • Also included: 2 yokes, 1 temperature probe, 1 pair of protective gloves
    • Available for voltages of 200, 400–460 and 500–575V
    • Extremely simple operation thanks to the sliding yoke
    Download specifications (pdf)
  • IH240

    IH 240

    • For rolling bearings weighing up to 1200 kg
    • For workpieces with inner diameter of 142 to 850 mm
    • Also included: 1 yoke, 1 temperature probe, 1 pair of protective gloves
    • Available for voltages of 400, 460 and 575 V
    • Extremely simple operation thanks to the sliding yoke
    • Support legs can be adjusted according to the size of the workpiece
    Download specifications (pdf)

Request more information

  • This field is for validation purposes and should be left unchanged.

Contact us now

Roel Snijders

Consultant

  • +31 (0)78 – 654 99 66
  • info@le-bv.nl

Contact details

Jacobus Lipsweg 100, NL-3316 BP - Dordrecht
  • +31 (0)78 - 654 99 66
  • info@le-bv.nl
  • Mon - Fri opened from 8:00 AM - 5:00 PM