AMC ROPE

AMC ROPE

NDT equipment for ropeways and goods lifting

The ROPE device family consists in wide range of detectors, suitable for the test of ropes employed in different areas, such as goods lifting (cranes and hoists) and ropeways (cableways, people movers, … ).
Based on the magneto-inductive principle,
the device is suitable in different sizes, depending on the maximum rope diameter that the detector can control.
The ROPE device allows a safe, reliable and objective control of the rope integrity, by highlighting the presence of internal and external broken wires, wear and corrosion, in according to the UNI ISO 4309 standard.
The devices of the amc rope family are certified in according to the EN 12927-8 regulation.
The detector is wired connected to a record unit (IASH) that allows to acquire, show and store the data in order to give to the operator a complete management of the signals.

Device features:
Weight: 7kg to 34kg
Max n° ropes: 1
Controlled diameters: from 0 mm to 80 mm

Performance:
Max speed: 8 m/s
Acquisition system: IASH
IASH battery autonomy in continuous operation: 24 hours
Sampling rate per channel: until 20 kS/s
Resolution: 14 bits

  • AMC ROPE 22

    AMC ROPE 22

    • NdT tests on wire ropes from 13mm up to 22 mm
    • Measure the LF Signal (Localized Fault), that is an objective identification of broken wires (internal and/or external)
    • Extreme lightness (due to the FEM optimization of the magnetic structure) able to be used in mobile configuration
  • AMC ROPE

    AMC ROPE 40

    • NdT tests on wire ropes from 20 up to 40 mm
    • Measure the LF Signal (Localized Fault), that is an objective identification of broken wires (internal and/or external)
    • Extreme lightness (due to the FEM optimization of the magnetic structure) able to be used in mobile configuration
    • Rope Centering System (wheel mechanical guiding system) that allows big improvements both in signal quality than in friction reduction in the internal device bushings
    • Presence of an Encoder system for the defect positioning, fully integrated in the detector

    AMC ROPE 65

    • NdT tests on wire ropes from 40 up to 65 mm
    • Measure the LF Signal (Localized Fault), that is an objective identification of broken wires (internal and/or external)
    • Rope Centering System (wheel mechanical guiding system) that allows big improvements both in signal quality than in friction reduction in the internal device bushings
    • Presence of an Encoder system for the defect positioning, fully integrated in the detector
    Download specifications (pdf)

    AMC ROPE 80

    • NdT tests on wire ropes from 65 up to 80 mm
    • Measure the LF Signal (Localized Fault), that is an objective identification of broken wires (internal and/or external)
    • Rope Centering System (wheel mechanical guiding system) that allows big improvements both in signal quality than in friction reduction in the internal device bushings
    • Presence of an Encoder system for the defect positioning, fully integrated in the detector
    Download specifications (png)

Request more information

  • This field is for validation purposes and should be left unchanged.

Contact us now

Roel Snijders

Consultant

  • +31 (0)78 – 654 99 66
  • info@le-bv.nl

Contact details

Jacobus Lipsweg 100, NL-3316 BP - Dordrecht
  • +31 (0)78 - 654 99 66
  • info@le-bv.nl
  • Mon - Fri opened from 8:00 AM - 5:00 PM